Facilities and Finishes

The Schindler 3300 elevator was designed according to Swiss precision standards – reliability is integrated. It has a larger cabin that fits standard elevator shafts. Using smaller technical components makes for a roomier, more comfortable car that holds more passengers. Specially designed to be energy efficient and environmentally friendly. Its precision engineering means quiet operation less noise pollution.

• Capacity – 625 kg, 8 passengers
• Travel height – max. 75 m, max. 20 floors
• Drive – engine with regenerative drive technology, without an engine room
• Speed – 1.0 m / s, 1.6 m / s
• Warranty – 24 months

Salamander Bluevolution 82 Windows – The new generation of the Blu Evolution system has an innovative structure with 6 rooms, with a construction depth of 82 mm. The system has optimum thermal protection offering the best energy efficiency. The thermal insulation of the Blu Evolution 82 window is excellent because the median gasket improves the thermal and acoustic properties offering safe protection against the wind and rain.

• ROTO NT hardware accessories
• 44 mm thermo-glazed window Tripan Clear + Clear + Low-e
• Warranty – 24 months

Video interphone ELECTRA SMART – Exterior panel with 8 mm secure GLASS surface, aluminum housing, 1/3 Sony CCD video camera (537 × 597), electronic display for the list of tenants, illuminated touch keyboard, full-duplex communication.

PINUM Sara interior doors – White finish – 2PB, Inciso 4 and Onda models

• PINUM Sara Brochure –

PINUM Suite interior doors – Tweedy Walnut, Elm and Ribeira finishes

• PINUM Suite Brochure –

PINUM Nusco Silver entrance doors – Grey / White finish

• PINUM Nusco Silver Brochure –

Warranty – 24 months

• Exposed bath shower mixer Ideal Standard Ceraline –
• One hole Vessel basin mixer Ideal Standard Ceraline –
• Rectangular Bathtub Ideal Standard Hotline New –
• Rectangular Vessel basin Ideal Standard Connect Air –
• Shower Kit Ideal Standard Idealrain Evo –
• Wall mounted bowl Ideal Standard Connect –
• Seat and cover thin – soft close Connect –
• In-wall flush toilet tank for wall mounted bowl –
• Dual flush control plate matte chrome Eco Systems –
• Single lever exposed shower system Ideal Standard Idealrain Soft –
• Handwash basin 45 cm Ideal Standard Strada –
• One-hole basin mixer Ideal Standard Ceraline –

Bticino Classia – A modern pure shape, defined by an accurate outline which contrasts with a gently curved surface. The frame gives a unique touch to your switch.

• White chrome finish

VAILLANT ecoTEC intro VUW 18/24 AS/1-1 gas condensing boiler for heating and preparation of hot water instantaneously.

ECOTEC Intro offers everything you could want from a modern heating and hot water solution: high quality, state-of-the-art technology and robustness.

• Standby power consumption less than 2W
• Hot water flow – 11.5 l / min, (ΔT = 30 ° C)
• Touch screen display

Uponor Comfort Pipe PLUS – PE-Xa pipe with EVOH (ethyl-vinyl-alcohol) oxygen diffusion resistance with an extra outer protection layer in white colour with two blue stripes was used for the floor heating system. The cross-linked polyethylene is produced according to prEN ISO 15875 “plastic pipe systems for hot and cold water installations – cross-linked polyethylene” and the oxygen diffusion resistance according to DIN 4726. Used for underfloor heating is compatible with Q&E and Uponor compression fittings.

• Application class 4+5/ 6 bar
• Max design temperature: 90°C
• Malfunction temperature: 100°C
• Design pressure 6/8 bar at 90°C/70°C
• Fire class: E according DIN EN 13501-1

Water supply made with Uponor Aqua Pipe – PE-Xa, Pipes manufactured from peroxide cross-linked polyethylene (PE-Xa) using the Engel method acc. EN ISO 15875, for supply lines, rising mains and connection lines for plumbing and heating.

Classification of service conditions acc. to EN ISO 15875:

• Fire classification E according to DIN EN
  13501-1
• Classification of service conditions acc. to EN ISO 15875
• Application class 2 – Hot water supply (70°C)
• Malfunction temperature: 95°C
• Max pressure 10 bar

The infrastructure of the building (foundation) is a rigid box type made with reinforced concrete (reinforced concrete was used for the foundations, walls and basement ceiling).

The superstructure is made of reinforced concrete frames consisting of poles, walls and slabs of reinforced concrete. The resistance structure was built using C25 / 30 resistance concrete for the floors and C30 / 37 for the vertical elements (poles and walls). The concrete steel used in the reinforcement is of type BST500S.

The roof of the construction is framed with roughly squared resinous wood and covered with folded metal sheets. All the components of the roofing (scaffolding, rafters, clamps, beams, lathing) were subjected to treatment against decay, insects, mold, fungi and last but not least against fire.

All the materials used to build the resistance structure were stipulated in the mechanical resistance and stability technical project and, were accompanied by technical sheets, technical approval of compliance, documents that can be found in the Technical Book of Construction. The construction was designed to withstand earthquakes with a magnitude between 8 and 8.5 degrees on the Richter scale.

The insulation is made with expanded polystyrene EPS 80 of 100 mm screened between levels with 100 mm wool wadding for thermal comfort, acoustic insulation, fire safety and a reduced impact on the surrounding environment.

On the exterior, the decorative plaster is water resistant, textured, vapor permeable, crack and mechanical stress resistant, protects the thermal insulation and is very durable. It can be repainted, making the façade easier to maintain and repair or give it a fresh new look if needed.